Drum length calculator and drum thickness calcualator

EOT Crane Drum Calculators

Disclaimer: These calculators are for estimation and educational purposes only. Final designs must be validated by a qualified engineer as per IS 3177/IS 807.

1. Drum Length Calculator

Lifting Height (H) mm

Wire Rope Diameter (d) mm

Number of Rope Falls (n)

Drum Diameter Coefficient (h) (from IS 3177)

Number of Dead Turns (n_d) turns

Drum Length Results:

Groove Pitch (p): mm

Min. Pitch Circle Diameter (D): mm

Total Rope to be Stored (L_r): mm

Number of Active Grooves (N):

Total Grooved Drum Length (L): mm

2. Drum Thickness (Stress Check)

This checks the stresses for an assumed thickness. You must first run the calculator above or provide the known parameters.

Safe Working Load (SWL) kg

Hook Block Weight kg

Number of Rope Falls (n)

Sheave Efficiency (η) (e.g., 0.98)

---

Groove Pitch (p) mm

Mean Drum Diameter (D) mm

Drum Support Span (L_s) mm

Hoisting Torque (M_t) N-mm

Material Allowable Stress (σ_a) MPa (N/mm²)

---

Assumed Drum Thickness (t) mm

Drum Thickness Stress Check Results:

Max Rope Tension (T): N

Compressive Stress (σ_c): MPa

Bending Stress (σ_b): MPa

Torsional Shear Stress (τ): MPa

Equivalent Stress (σ_v): MPa

Design Check: